Skip to content

Starter Guide

Congratulations on your purchase of a Famoco Starter Kit!

Starter Kit

The box contains: device, battery, USB cable & wall plug, rubber, wrist strap

To get started:

  1. Insert the battery
  2. Charge until LED is green
  3. Set up your Famoco Management Suite (MDM) account
  4. Connect your device to the Internet by either:
    • creating a Wi-Fi hotspot (SSID: FAMOCO, key: famocoaccess) for the device to automatically connect to;
    • manually connecting to an available Wi-Fi network from the device's Settings;
    • or inserting a SIM card.
  5. Your device will automatically sync. If it doesn’t, press and hold the Volume Up button to access the Dashboard, then press the sync button
  6. Activate the Developer Mode in the MDM profile to enable access to Android Settings and allow USB connection for development needs

You’re all set!