Skip to content

FX105

FX105 1.7.0

April 26, 2024

Bugfixes

  • Fix slow SAM communications on AT90
  • Fix Android Open Accessory
  • Fix status UI crash
  • Fix various NFC-related crashes
  • Fix OMAPI issue with logical channel
  • Fix OMAPI issue with command starting with “C010”

Improvements

  • Support for Famoco Connect feature
  • Disable the navigation bar
  • Make status bar swipe toggleable
  • USB device filtering: Adding a system property to limit the USB devices that can be connected to the Famoco device, or to forbid a specific USB device to be enumerated on the Famoco device. This feature introduces two blacklists (and maybe some white list in the future) containing the USB port to blacklist and a vendor ID product ID couple to block. This feature is manageable as of MDM release 2.22 but not open to end customers because of its setup complexity. Please contact support should you need this feature
  • “Enforce OEM locked state” security feature: OEM or “Original Equipment Manufacturer” or simply OEM locking is an added security feature which Android device manufacturers use to protect unauthorized access to the device's Bootloader. This ultimately helps safeguard the Android Operating System running on a device from being interfered in any way
  • Disable fastboot: security improvement to update “Famoco Custom Boot” feature to improve security and disable fastboot
  • Supported APN List update: add Vodacom TZ APN without MVNO config
  • Disable BROM CMD at runtime: Mediatek's chipset has a secure boot vulnerability that can only be fixed by disabling BROM CMD at runtime
  • Update FamocoLayer to v3.14.3

FX105 1.6.0

June 2, 2023

Bugfixes

  • Fix an issue where a white line could appears sometimes on the screen
  • Fix over-consumption when device is off

Improvements

  • Led customization: the green charging LED is now configurable depending on the percent of the battery voltage. Indeed there is now a famoco feature to limit the battery regulation charge voltage to lengthen battery lifetime. Without this feature, the led color is red while it should be green
  • NFC Bluetooth pairing: made optional
  • NFC Wifi setup: made optional
  • EMVCo polling dynamic activation: so far, the polling type can be changed by using a specific config file. And so, it is not done dynamically, and it needs the restart of the NFC stack. This feature makes it dynamic
  • Auto SIM lock: this feature allows to automatically unlock the Famoco device with a specific SIM card using a calculated PIN code
  • Added Safaricom Ethiopia APN
  • Update FamocoLayer to v3.9.5

FX105 1.5.1

January 7, 2022

Improvements

  • Support TEE
  • Implement Secure boot
  • Update FamocoLayer to v3.7.0

FX105 1.4.1

August 19, 2021

Bugfixes

  • Fix battery charging issue
  • Fix excessive power consumption issue

Improvements

  • Allow to send SAM proprietary command using the Smartcard API
  • Update Famoco Layer to 2.36.0

FX105 1.3.0

October 15, 2020

Bugfixes

  • Update without battery was not working

Improvements

  • Configurable autoboot support
  • Support Open Mobile API to external secure element
  • Support to block camera autofocus
  • Update webview to 83.0.4103.120 version

FX105 1.2.2

October 12, 2020

Improvements

  • Add attestation chain
  • Add Orange M2M APN
  • Update Famoco Layer to 2.30.0

FX105 1.1.0

July 1, 2020

Please note that the SAM is not usable in this image

Bugfixes

  • Fix bluetooth critical security issue (CVE-2020-0022)

Improvements

  • Update touchpanel firmware
  • Update FamocoLayer to v2.29.0
  • Optimize camera effects

FX105 1.0.0

March 28, 2020

Please note that the SAM is not usable in this image

This is the first official version for FX105